Antony,
Right on!  The Eco-fasten will solve the issue - it's been pull-out tested 
sans-rafter penetration. Have bought the eco-green fasteners from them, will 
again.  As far as dealing with them - it's a great pleasure to be able to talk 
to someone with good product knowledge that will take the time to answer stupid 
questions. 

Holt E. Kelly
Holtek Fireplace & Solar Products
500 Jewell Dr.
Waco TX. 76712
254-751-9111
www.holteksolar.com

  ----- Original Message ----- 
  From: Antony Tersol 
  To: re-wrenches@lists.re-wrenches.org 
  Sent: Monday, July 19, 2010 11:33 AM
  Subject: [RE-wrenches] Foam Insulation Install


  Have you looked at EcoFasten mounting.  They have a mount that uses 8 screws 
per attachment, so can theoretically hold without going into the rafters.  Then 
could use a large flashing over that to integrate with the shingles.


  I think they're an offshoot of AlpenSnowguards in Vermont.  We started 
working with Alpen to source S5 clamps several years ago, and have found them 
great to work with.  


  We're a West coast company - there were lots of other distributors closer, 
but Alpen got and kept our business.  It's kind of funny - when I call them, I 
feel like I'm talking with someone in one of those old hardware stores with 
everything you need right there in bins, and when I call the other guys it 
seems like someone in a sales office who never handles the product.  


  The EcoFasten crew is similarly helpful, and they have some well thought out 
products.  The name I have in my rollodex is Chris Sterns, at 877-859-3947.  


  http://www.ecofastensolar.com/our-products/eco-fasten


  Their website is pretty comprehensive, and includes leak and load tests and 
building code info.  Other cool mounting products too.
  -- 
  Antony Tersol
  Solex / Applied Solar Energy
  831-333-1919



  You wrote:


  For residential install with the spray foam insulation

  Underside of deck has 12"+ of foam.....no way to accurately locate rafter
  there.....hammer and ear also out of the question...........don't think any
  of the stud finders will work....been told that peeling back shingles to
  locate rafter is only accurate way.......would like to avoid that if
  possible..........any suggestions?

  Holt E. Kelly
  Holtek Fireplace & Solar Products
  500 Jewell Dr.
  Waco TX. 76712
  254-751-9111
  www.holteksolar.com


------------------------------------------------------------------------------


  _______________________________________________
  List sponsored by Home Power magazine

  List Address: RE-wrenches@lists.re-wrenches.org

  Options & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

  List-Archive: 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm

  Check out participant bios:
  www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to