I had to swallow it and get the set, at least if you he none you can do all 3 of the ends with 1 tool and interchangeable dies. Figured it was better than getting them all separately. The tool had to come from AEE, this company was not on the web at that point, but i think they are the manufacturer.
I now have fewer little pieces of wire around... Bob On Wed, Feb 17, 2010 at 9:19 PM, Marco <ma...@pvthawaii.com> wrote: > With all the changing connnectors, it's tough to keep up with having the > right tools. > > To use the MC4 locking connector from Multi-Contact, you need to use the > MC4 crimper pliers. > > Multi-Contact wants almost $400 for one while distributor is asking for > something close $500. > > However I did find one from a company called Rennsteig Tools out of Ohio. > They're selling them for $225/each. > > Question: does anyone have experience with this particular tool and the MC4 > connector? > > thanks, > marco > > ProVision Solar, Inc. > Marco Mangelsdorf, President > 69 Railroad Avenue, A-7 > Hilo, Hawai'i 96720 > (808) 969-3281, (808) 934-7462 fax > www.provision-solar.com > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
