Hi Larry,
You've got a few options,
either a few smaller turbines or one large unit;
Derik at Hipower really knows his stuff with the intertie hydros.
For the smaller units (which might be cheaper) contact
Derik at Hipower hydro
707-923-3507
http://hipowerhydro.com/
for the larger unit,
contact
Canyon industries
http://www.canyonhydro.com/
jay
peltz power
On Sep 23, 2009, at 7:07 AM, Larry Brown wrote:
Wrenches,
Any recommendations for a small scale hydro manufacturer for a grid-
tied system with about 80 feet of head and 1200 gallon per minute
flow and the dam already in place. The load at this Center is to
high for an affordable battery bank and the grid is close at hand,
they already have a backup generator and transfer switch
Thanks for any advice
Larry Brown
Sun Mountain
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
