The only problem I've had with them is that their connectors can allow multi stranded wire to "broom out", (after installation) -- causing a loose / high resistance contact. I've learned to torque / wiggle & twist and retorque all multi strand connections. I have had one side of a 60A QO breaker go open out of the blue. db


Dan Brown
President
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44

-------- Original Message --------
Subject: Re: [RE-wrenches] CBI circuit breakers
From: Allan Sindelar <al...@positiveenergysolar.com>
Date: Mon, July 27, 2009 1:36 am
To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org>

I have had no problems to date, Kent. Can you be more specific as to what
problems you have had?

Allan Sindelar
al...@positiveenergysolar.com
NABCEP Certified Photovoltaic Installer
EE98J Journeyman Electrician
Positive Energy, Inc.
3201 Calle Marie
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com

-----Original Message-----
Is it just me, or have other wrenches had problems with the CBI circuit
breakers used in the Outback or Midnite combiner boxes?

Kent Osterberg
Blue Mountain Solar, Inc.
http://www.bluemountainsolar.com/


_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to