Hi folks,
I need an inverter/charger/controller solution for a grid connect
house that:
1. grid-connects (net-meters)
2. Islands off of the battery in outages (whole house UPS)
3. Feeds into the whole house breaker, so the whole house is backed up
4. Shuts down less important breakers as needed, if the load for the
whole house is over the inverter limit
Instead of guessing which breakers are important to put on a battery
backed up sub-panel, my client would like the whole house backed up.
But of course, can't guarantee that the house won't be drawing too
much for a 6000 Watt inverter at any given time. So would like to have
the system intelligently remove less important breakers until the
system is below the inverter operation wattage.
Anyone know of a inverter system that is smart like that?
Troy Harvey
---------------------
Heliocentric
801-453-9434
tahar...@heliocentric.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
