Wrenches,
My client in Southern California wants at least 1 MW PV on each of 2
buildings with very large flat roofs. The problem is the structural engineer
says the roofs can only support less than 4 pounds per square foot
additional load. Penetrations are a secondary issue, but weight is a
deal-killer. I would really appreciate your combination module/mount
recommendations. If you have a proprietary design low-weight array, please
contact me off-list so I can put your company on the bidder's list. Thank
you very much.
Joel Davidson
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
