I have a customer with an Outback GTFX 3048 that has an"over voltage
AC in" warning but when I check the voltage with my Fluke meter it
shows a normal range 122 - 126 V . In the Mate grid menu the AC high
Volts is set at 140 V . The customer called Outback support before I
could get to him and they told him he needed to have me change all 3
boards out. They sent the boards so I went ahead and changed them
out, but the same error occurred again. We called Outback support
again but did not get a satisfactory answer on how to fix it.
Has anyone else run into this problem ? I suspect the Mate may be flaky.
Jon
Jon Haeme Innovations
Kempton, IL
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
