Hi wrenches, I am working on a project that involves a large UPS system. The UPS system is powering all DC loads, and as such the batteries will be connected directly to the backup loads panel. I am wondering if any of you are familiar with a relay that will operate as a low voltage disconnect/reconnect. We are using stacks of three xantrex xw inverter/chargers for each back up battery bank. Do any wrenches know of a relay that would work for this configuration (48 volt battery bank)? I thank you all for your time and expertise.
Jeff Blick Lead PV Installer Sunlight Solar Energy, Inc. direct: 541-306-4196 fax: 541-322-1911 jeff.bl...@sunlightsolar.com www.sunlightsolar.com This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you have received this e-mail in error, please notify me by replying to this message and delete the original, any copy of this e-mail and any print out made. For additional information about Sunlight Solar Energy please refer to our website at <blocked::http://www.sunlightsolar.com/> http://www.sunlightsolar.co
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
