Hello,
In our off-grid systems in Africa, we have been using the AUX relay on the FX to perform an alarm function (instead of starting a generator that might not start.) We use the GenAlert programming to energize and de-energize an alarm on two voltage settings. (low battery, and recovered battery….) We have some instances where we are trying to retrofit a similar alarm situation into an inverter system that has no programmable relays. Any ideas as to what equipment we could use to take the place of the AUX contact on the FX? WE can deal with either wet or dry contacts, but the tricky part is being able to set the voltage on and off points. We are dealing with both 48V and 24VDC systems. Thanks, Walt Walt Ratterman SunEnergy Power International 11 Laurel Lane South Washougal, WA 98671 (360)-837-3680 ▪ fax (360)-837-1315 ▪ Skype Walt-Mobile <mailto:wratter...@sunepi.org> wratter...@sunepi.org ▪ <http://www.sunepi.org/> www.SunEPI.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
