Thanks,
The closest PE is in La Paz, so I'm not going to worry.
jay
On Feb 12, 2009, at 10:44 AM, Tump wrote:
Hey Jay we have used epoxy in the past, drill hole, clean, fill w/
E, put SS
threaded rod in hole & there ya go! ( all the feet at the hi
school) you
will probably need to talk to a PE if your getting a permit, but it
works
great. Contact Chris of me off list FMI TUMP
-----Original Message-----
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay
peltz
Sent: Tuesday, February 10, 2009 8:35 PM
To: RE-wrenches
Subject: [RE-wrenches] anchoring racks to concrete roof
I've got a client with a foam core concrete covered roof.
the concrete is 2.5" thick + over metal mesh over 6" ridged foam and
then the same on the inside.
What anchor choices are best to mount the feet to?
Thanks in advance
jay
peltz power
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
