Hello Peter,
We have used the Mitsubishi Alpha PLC, it has a GSM interface and can be setup to perform this task.
It is a few hundred dollars, is best setup with a DC power supply.
We get them from Campbell & George in San Jose CA.
The engineers at C&G have been helpful.

Good Luck Dean

Peter Parrish wrote:

We have sold an off grid system delivering 24 volts DC. The application is “mission important”. We have built in a LVD and alarm, but the client wants an "early warning" system based on sending text message to a cell phone number. So we need to program a LCD around 20% residual capacity (easier part) and a cell phone interface. I know the PPA community has a solution: high-end comm link and big bucks. Is there something simple and cheap that we can implement?

 

- Peter

Peter T. Parrish, President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parr...@calsolareng.com


_______________________________________________ List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

  

-- 
Dean T. Newberry
Talbott Solar & Radiant Homes Inc.
430 D Street
Davis, CA 95616

T: 530 219-3606
F: 530 758-8187
E: de...@talbottsolar.com
W: http://www.TalbottSolar.com/
   http://www.TalbottRadiant.com/
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to