Nik, Thanks for the info. I was just about to ask if anyone has used the Heliodyne Delta T-Pro....
Where did you source it from? Gro has given me an expected price of ~$300 (but don't have 'em). The cost of the digital flow meter/temp gauge is on top of that. Is the digital flow meter necessary, or can you input a flow rate from an existing analog flow gauge? Seems like a good option for data logging. Is the software MS Windows - only? Thanks, -Kelly Kelly Keilwitz, P.E. Whidbey Sun & Wind, LLC Renewable Energy Systems NABCEP Certified PV Installer 987 Wanamaker Rd, Coupeville, WA 98239 PH & FAX 360-678-7131 [EMAIL PROTECTED] On 11/18/08 6:21 AM, "Nicholas Ponzio" <[EMAIL PROTECTED]> wrote: > Kelly, > > The new Delta-T Pro controllers from Heliodyne have built-in networking > capability (WiFi or Ethernet.) Retail is around $500. > http://www.heliodyne.com/products_systems/control_units/delta_t_pro.html > I have one system up and running with the WiFi model for about 4 months > now. No problems yet. There's no display on the controller itself and > the software user interface is pretty rudimentary but it gets the job done. > > Best of luck. > -Nik > _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
