Hi Wrenches, I am in the middle of a job that looks like we need to go wireless from the SMA SB7000US inverter on the first floor up to the WebBox through the house at the router location. The WebBox will plug into the wireless router with the supplied red patch cable.
Any and all does and don'ts on this will be really appreciated. In the SMA WebBox tech trainings they have shown this as possible using a wireless or RF modem by MaxStream or Digi, called the 9-XTend-PKB Modem. Has anyone else done this with success? We only need to hook up three conductors to each device in this loop so that is another concern as to the wiring into the RF Modems. Sincerely, Chris Worcester NABCEP Certified PV Installer USA Distributor of Proven Wind Turbines Toll Free: 877-682-4503 Fax: 530-582-4603 <http://www.solarwindworks.com> www.solarwindworks.com <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] "Proven Energy Solutions"
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
