Yes it was, and you're right, it is a simple mercury switch, no mppt or anything else. I rather liked the DC circuits buil into the panel since it allowed for controlling individual DC circuits. We had two in our house and thus had separate breakers for our DC well pump and DC pressure pump. But again that was with the basic Infinity 6 panel, which is the left side of the unit you have.
Tom ----- Original Message ----- From: "Drake Chamberlin" <[EMAIL PROTECTED]> To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org> Sent: Saturday, September 27, 2008 11:22 AM Subject: Re: [RE-wrenches] Vanner - BP inverter Thank you Tom. I don't know if it is the same or not. It seems like it must be related. Do you know if the charge control was theoretically rated at 60 amps? Drake _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.7.3/1694 - Release Date: 9/26/2008 6:55 PM
No virus found in this outgoing message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.7.3/1694 - Release Date: 9/26/2008 6:55 PM
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
