William, While it will work, the only big reason to do it is for 240V loads. With your experience, I suspect that you know this. The penalty is 32W idle, and both inverters shut off if one overloads. Some years ago we did a large GTWB system with a 4048 and a 5548 that were not stacked, but served separate 120V circuits. This design approach was based on the higher surge of the 4048 for background motor loads and the 5548 for most circuits. It has worked well. Allan at Positive Energy
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Edmunds Sent: Wednesday, September 24, 2008 12:56 PM To: RE-wrenches Subject: Re: [RE-wrenches] SW inverter matching Hi William, Technically, it will work... officially, we do not support stacking anything except like items. The part number for the stacking cable is just SWI - there are lots of dealers and distributors that still have stock, though we are out. Hope this gives you some guidance, Best, Mark Mark Edmunds Xantrex Technology Inc. (soon to be Schneider Electric!) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of William Miller Sent: Wednesday, September 24, 2008 9:06 AM To: RE-wrenches Subject: [RE-wrenches] SW inverter matching Friends: Is it possible to pair a Xantrex SW4048 with an SW5548? Has anyone tried it? Does anyone have a spare sync cable they might like to sell? Thanks in advance. William Miller _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
