I have also seen this GFDI OPEN message on a few SB3000US units. I
have managed to get the unit to boot properly by switching it off,
pulling the GFDI fuse out, slightly crimping the fuse clips to make
them tighter, then putting fuse back in and switching it on. This
may have actually had an affect, or it may have simply been the
restart that did it. In any case it seems like this may be a more
common occurrence than SMA knows. Two units required one restart, one
unit took three before it finally booted correctly.
Jim Grundy
NABCEP Certified Solar PV Installer™
Vermont Solar Specialist Plumber PS-279
Elemental Energy, Inc.
1750 Clark Rd
E. Montpelier, VT 05651
802-476-3441 (p)
802-476-5680 (f )
802-272-8933 (c)
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
