>> how exactly are those track braces stopping the tracks from giving you problems?
Here's a drawing of the top of the brace. There are two recesses where the square attachment tab fits snugly. The track pad can't rotate on the chain when the tab is in the pocket. Again these are Makerbot parts and not the strongest. They should be fine for my test and to prove (or disprove) the thrown tracks theory. If they work well, I'll cast something similar from resin. Speaking of resin casting, your idea of using detachable cows legs with steel rods is interesting. I also thought about joining the left and right legs with a resin brace. Do you know of a way to make them hollow to reduce the amount of resin ? I thought about pressing in a balloon or a couple of ping-pong balls while casting. Then again, I'll only make a few and maybe the difference in resin isn't worth the trouble. >> adding that monitor to your controller, so it make it more difficult to hand and operate the tank? The controller has always had a monitor, I just didn't have any new pictures. There is a harness attached to the backpack to take the load off my wrists. >> now does the camera in the tank run through the on-board PC or does it have it's own transmitter? Both cameras go through the PC and video is sent via WiFi to the operator. - Doug From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, September 17, 2012 2:09 AM To: [email protected] Subject: Re: [TANKS] cows, tracks, and computers Mooooove on over........... as to casting them in resin, it might be a bit costly if they are to be a big, solid casting (thinking of the mold material and the resin alone). 2 things i would suggest is make the legs separate with steel rods going through them. you could have holes in the legs (that would be part of the body) to accept the steel rods as o would see the legs on that target (sorry, cow) being a week point and being one of the first things to break. same would go for the ears. how exactly are those track braces stopping the tracks from giving you problems? adding that monitor to your controller, so it make it more difficult to hand and operate the tank? i'm just thinking of that little bit of extra weight on the front of it making it a bit front heavy or will you be using some sort of minor harness to help support it all (as i'm not sure of just how much it might weigh now). now does the camera in the tank run through the on-board PC or does it have it's own transmitter? Chris -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
<<image003.png>>
