Now that is brilliant. The output shaft can be dumb or live too. Mike
________________________________ From: TyngTech <[email protected]> To: [email protected] Sent: Monday, September 17, 2012 12:10 PM Subject: [TANKS] Interesting Compact Chain Reduction I ran across this interesting roller chain reduction by AmpFlow. This is a triple reduction setup using only two shafts. The unique and compact aspect is that the intermediate sprockets idle on the the motor and output shafts. It appears to be using three 11 and three 21 tooth sprockets for a total of around 8:1 reduction. The way this works is that the first 11 tooth sprocket is keyed to the motor shaft. The first stage consists of a 21 and 11 tooth combined sprocket assembly (probably two standard sprockets welded together) which idle on the output shaft. The second stage is the same thing but idling on the motor shaft. The last stage reduction is a 21 tooth sprocket keyed to the output shaft. ST -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
