I counted bolts the other night on my load-hauler. 10 M6 including brakes and Nitto rods; 1 M7 on a Bertoud decaleur';2 M8 on stem and seapost; and 28 M5 including racks, fenders, bottle cages and chainring bolts.
On Thursday, March 13, 2014 11:47:11 PM UTC-5, dougP wrote: > > Another good source is Ace Hardware. I get stainless to avoid rust. > > dougP > > On Thursday, March 13, 2014 8:30:32 PM UTC-7, Jim Bronson wrote: >> >> Don't mean to be dense but what is the bolt size needed for the eyelets >> that you connect a rack to that are near the rear dropouts? And can these >> be obtained at say Home Depot? >> >> I know the head is either 4mm or 5mm, but that doesn't help with the >> thread size. Or does it? >> >> Basically, I just need some bolts to hook up this R-14 that I got from >> this list. I have the stock Rivendell bolts on the seat stays above the >> brakes, and I will use those, but I need to know what to get for the >> eyelets. >> >> -- >> Keep the metal side up and the rubber side down! >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
