I built a wheel for my MB-2 Resurrectio project using the SA 2 speed coaster 
brake kickback hub.  So far the hub has been very reliable, and it’s a great 
simple solution if you’re looking for just a little more gear range.  If I were 
doing it again, however, I’d prefer not to use the coaster brake iteration of 
the Kickback; sometimes braking and shifting attempts interact in an unexpected 
way (probably my lack of finesse).  SA does make a non-coaster brake version, 
and I bet that’s terrific.

From: rbw-owners-bunch@googlegroups.com 
[mailto:rbw-owners-bunch@googlegroups.com] On Behalf Of David Spranger
Sent: Thursday, February 27, 2014 10:15 AM
To: rbw-owners-bunch@googlegroups.com
Subject: Re: [RBW] Re: Mini-Beam

I built a wheel with the SRAM 2-speed hub (originally for my SimpleOne, but 
have since moved it to a different bike). I love this hub. It is different than 
the SA kickback in that it is not a kickback, but instead shifts automatically 
from one speed to the other at a preset point. For my wheel and tire size, that 
worked out to be around 12 mph. I preferred to have it shift at a slightly 
higher rate and, with instructions found on the internets, I was able to raise 
the shift point to about 15 mph. After a best guess of 15,000 miles or so, I 
can say that this hub seems very reliable. When I did open it up to change the 
shift points, I did clean it out real good, repacked the bearings and added 
some Phil's oil to splash around in there.

David
Charlotte, NC

On Thursday, February 27, 2014 6:53:19 AM UTC-5, djbardwil wrote:
I don't think so although it seems like a nice, reasonable set.  The 2 speed 
hub is intriguing and I'd like to see if I can learn a thing or two about 
wheelbuilding on this bike.  A dynohub on the front would be neat.

If anyone has any experience with this hub or just thoughts, I'd love to hear 
what should be considered.



On Wednesday, February 26, 2014 11:36:07 PM UTC-5, 
cyclot...@gmail.com<mailto:cyclot...@gmail.com> wrote:
Perfect, glad it has a good new home! You going to get the wheelset they're 
selling as well?

Cheers,
David

"it isn't a contest. Just enjoy the ride." - Seth Vidal



On Wed, Feb 26, 2014 at 7:54 PM, djbardwil 
<djba...@gmail.com<mailto:djba...@gmail.com>> wrote:
Well, I am thrilled to be the very lucky winner of the auction and admit my 
addiction to Rivendell.  I was a bit surprised that only one bid came through 
but it is a small frame and the dead of winter so the audience may have been 
limited.  Apparently, there are only 30 of these 50 cm QBs.  It should be a 
great project and I intend to take it slowly and thoughtfully as I've never 
built up a non-derailleur bicycle.  Initial thought was to possibly try out the 
Sturmey-Archer 2-speed Kickback hub as the basis of a wheel build and possibly 
a Sturmey-Archer crankset but I'll need to do some homework on gearing, 
spacing, chainline etc.  Nothing is set in stone at the moment and each 
component will be a new decision point but, barring the possible S-A 
components, it will clearly be a Rivendell build when it's done.

I enjoy this group very much and value your input, stories, and camaraderie.  
Photos will prove the project is underway!

Thanks -
David





On Wednesday, February 26, 2014 9:52:50 PM UTC-5, Coconutbill wrote:
One day...

--
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
rbw-owners-bun...@googlegroups.com<mailto:rbw-owners-bun...@googlegroups.com>.
To post to this group, send email to 
rbw-owne...@googlegroups.com<mailto:rbw-owne...@googlegroups.com>.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/groups/opt_out.

--
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
rbw-owners-bunch+unsubscr...@googlegroups.com<mailto:rbw-owners-bunch+unsubscr...@googlegroups.com>.
To post to this group, send email to 
rbw-owners-bunch@googlegroups.com<mailto:rbw-owners-bunch@googlegroups.com>.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/groups/opt_out.

------------------------------------------------------------------------------
****************************************************

To ensure compliance with Treasury Department regulations, we advise you that, 
unless otherwise expressly indicated, any federal tax advice contained in this 
message was not intended or written to be used, and cannot be used, for the 
purpose of (i) avoiding tax-related penalties under the Internal Revenue Code 
or applicable state or local tax law provisions or (ii) promoting, marketing or 
recommending to another party any tax-related matters addressed herein.
****************************************************
****************************************************

This email (and any attachments thereto) is intended only for use by the 
addressee(s) named herein and may contain legally privileged and/or 
confidential information. If you are not the intended recipient of this email, 
you are hereby notified that any dissemination, distribution or copying of this 
email (and any attachments thereto) is strictly prohibited. If you receive this 
email in error please immediately notify me at (212) 735-3000 and permanently 
delete the original email (and any copy of any email) and any printout thereof.

Further information about the firm, a list of the Partners and their 
professional qualifications will be provided upon request.
****************************************************
==============================================================================

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to