Hi Debra. The Ram is still available. The wheels are 32-spoke. The bike is ready to ride with the new brake cables installed and the bars wrapped with the cork tape - both are included with the bike. Mainly due to the stem potentially being too short for a new owner and wanting to facilitate a stem swap. More below. If the 8cm seems good for a new owner I will install cables and wrap/twine/shellac the bars.
I am planning to keep the Rivet saddle. Sizing. I think the 58 would be too small. Especially with the 8cm stem. Here is the link to the original brochure with sizing info: http://cyclofiend.3795Goh311b3nt/rbw/rambouillet/rambflyer/17.html For a 6' rider a 62 would be a much better fit. I am 5'9" and the 58 fits fine. Although I find the 8cm stem a little too short. There is a really clean 62 Ram on CL from Alameda. That might be a better bet. He has it on eBay as well. If you need help checking that out let me know. I work in Berkeley so not too far from Alameda. Let me know if you want more info. Dan > On Feb 15, 2014, at 8:52 PM, debra banks <banksde...@gmail.com> wrote: > > Hi Dan! Lovely Ram. I'm on the hunt for a bike for a friend and this may be > the ticket! So Q.1 is has it been scooped up by someone? Q.2 is does it need > any work, or is it ready to ride? Q.3 is how tall are you? Trying to get an > idea of frame size to height. My guy is 6.0'. Q.4 number of spoke holes? 32? > 36? Q.5 does the 50 off for SF area extend to Sac? We are often in SF for > brevets. Q.6. Is that a Rivet saddle that you are holding onto? > > That's it! Look forward to hearing from you. Best, deb > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
