Not to over simplify, but do you make sure you push the stem in far enough to get below the bead?
On Wed, Aug 7, 2013 at 9:55 PM, Kieran J <kjo...@gmail.com> wrote: > I can't remember this being an issue in my more distant memory, but > recently, I've had a couple of tires form a bit of a hump around the valve > stem after installing, pumping up and riding for a bit. I look closely, and > the bead is slightly out of the rim, producing a faint bulge. Once it > happened right away, another it happened later into a longer ride. > > The tire that did this most recently is the Kevler-bead folding TG Pasela. > Front wheel. I was riding along, and realized the front wheel was going > bump bump bump.. > > I'd like to think I install tires properly. Is this a common thing that > everyone knows about, I've just never come across before? Are there other > experiences out there similar to this? Are some tires more prone to > slipping out of the rim hook than others? > > KJ > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
