What rim are you using? I have been using 29cm Grand Bois" and really like them. But, I have used them on both 19 and 23cm rims and have to admit that I like them more on the narrower rims. On the other hand, I prefer my narrower tires on my wider rims at the lower, recommended pressure. ????????? Don C.
On Thursday, June 13, 2013 6:07:57 PM UTC-7, cyclot...@gmail.com wrote: > > And we have a winner! > http://www.flickr.com/photos/cyclotourist/9038484446/ > I mounted the tire as suggested for three days while the fam went to > Disneyland. Found a super-skinny 18-25mm tube and talked it up and slid it > in totally deflated. I was then able to slip the other bead on almost > entirely by hand. Still needed a lever to get on the last 4cm or so. I > inflated to 120psi and am going to let it sit for a few more days, then try > to get a regular 28-35mm tube in there and inflate it. I want to make sure > it mounts easily in case of road-side repair where it counts! So thanks to > all who recommended stretching and patience, looks like it's paid off so > far! > > Cheers, > David > > > > On Sun, Jun 9, 2013 at 8:48 PM, cyclotourist <cyclot...@gmail.com<javascript:> > > wrote: > >> Pure magic. Unicorn breath. Fairy prints. Unobtainium. Angel tears. >> >> I'm a better rider just thinking about them. >> >> Cheers, >> David >> >> >> >> On Sun, Jun 9, 2013 at 8:24 PM, dougP <doug...@cox.net <javascript:>>wrote: >> >>> Whew! Thank you, Jack Brown. So I'll stick to my original schedule & >>> circulate the Vittorias your way late June / early July. Meanwhile, good >>> luck with the tire stretching exercise. After all that effort they better >>> be good. >>> >>> dougP >>> >>> >>> On Sunday, June 9, 2013 6:03:24 PM UTC-7, cyclot...@gmail.com wrote: >>> >>>> Luckily I have a perfectly good pair of Jack Browns that I foolishly >>>> took off to try these out. I was tire-curious. I'll let them stretch on >>>> the >>>> rims over a couple of days, but am not holding out much hope. Shouldn't >>>> have to have a four part assembly to mount some tires! :-) >>>> >>>> Cheers, >>>> David >>>> >>>> >>>> >>>> On Sun, Jun 9, 2013 at 5:47 PM, dougP <doug...@cox.net> wrote: >>>> >>>>> Does this mean you'll soon be needing Rob's Vittoria Rando Hypers? I >>>>> was planning on doing some sort of mini-tour before the end of June >>>>> before >>>>> giving them up to you. >>>>> >>>>> dougP >>>>> >>>>> >>>>> On Sunday, June 9, 2013 2:05:31 PM UTC-7, cyclot...@gmail.com wrote: >>>>> >>>>>> That may be happening sooner rather than later! >>>>>> >>>>>> Cheers, >>>>>> David >>>>>> >>>>>> >>>>>> >>>>>> On Sun, Jun 9, 2013 at 1:14 PM, Esteban <prot...@gmail.com> wrote: >>>>>> >>>>>>> Looks like they're ready to stick into an envelope and send to me. >>>>>>> >>>>>>> >>>>>>> On Sunday, June 9, 2013 12:07:45 PM UTC-7, cyclot...@gmail.comwrote: >>>>>>>> >>>>>>>> Any suggestions? These things are a bear (and no maiden fair). I'm >>>>>>>> just about ready to give up as I can get them mounted, but can't get a >>>>>>>> tube >>>>>>>> inside. I'm currently hoping they stretch/take shape a little bit on >>>>>>>> the >>>>>>>> rim if I leave there for a while, but don't have a lot of hope. >>>>>>>> >>>>>>>> http://www.flickr.com/photos/**c****yclotourist/8999429698/in/** >>>>>>>> phot****ostream/<http://www.flickr.com/photos/cyclotourist/8999429698/in/photostream/> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Cheers, >>>>>>>> David >>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "RBW Owners Bunch" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to rbw-owners-bun...@**googlegroups**.com. >>>>>>> To post to this group, send email to rbw-owne...@googlegroups.**com. >>>>>>> >>>>>>> Visit this group at http://groups.google.com/**group** >>>>>>> /rbw-owners-bunch?hl=en-**US<http://groups.google.com/group/rbw-owners-bunch?hl=en-US> >>>>>>> . >>>>>>> For more options, visit >>>>>>> https://groups.google.com/**grou**ps/opt_out<https://groups.google.com/groups/opt_out> >>>>>>> . >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "RBW Owners Bunch" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to rbw-owners-bun...@**googlegroups.com. >>>>> To post to this group, send email to rbw-owne...@googlegroups.**com. >>>>> Visit this group at http://groups.google.com/** >>>>> group/rbw-owners-bunch?hl=en-**US<http://groups.google.com/group/rbw-owners-bunch?hl=en-US> >>>>> . >>>>> For more options, visit >>>>> https://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out> >>>>> . >>>>> >>>>> >>>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to rbw-owners-bun...@googlegroups.com <javascript:>. >>> To post to this group, send email to >>> rbw-owne...@googlegroups.com<javascript:> >>> . >>> Visit this group at >>> http://groups.google.com/group/rbw-owners-bunch?hl=en-US. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> >>> >> >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
