You should be good baring any issues with the front der. 107 or 110 work great. I did run into an issue with my Bomba but that was due to a modern Shimano front der not being able to adjust inward enough. So a 113 was necessary.
On Apr 29, 2013, at 3:14 PM, "William R." <wroma...@optonline.net> wrote: > Hi all. I am planning on installing a Sugino XD2 triple crankset that Riv > sells on my Sam H. I am trying to figure out if an IRD bottom bracket with a > 110mm spindle that I have will work for this application. I went looking for > the XD2 bb size on Sheldon Brown, but it wasn't listed. There are XD600, 500 > and 300 but no XD2. Is the XD2 the same as one of those? For those cranks > lists larger spindle lengths but then says that 107mm will work in some > situations. I could have sworn that somewhere on the Riv site it says that > 110mm bb is the right size. But I can't find that now. Can anyone set me > straight? Thanks. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en-US. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en-US. For more options, visit https://groups.google.com/groups/opt_out.
