Luckily was able to swap the bars and levers on my SimpleOne indoors over the winter. Followed the Rivendell method and used a table to make the levers even.
In the garage during summer it's basically feel. Eyeball it then hop on the bike and ride around the block with a 5mm wrench and adjust to taste. Not fast or time saving, but it's worked for me over the years. Eric Platt St. Paul, MN On Tue, Apr 16, 2013 at 12:29 PM, Philip Williamson < philip.william...@gmail.com> wrote: > Eyeball. I look at the shape made by the angle of the hood against the > curve of the bar. If the shape is different, the height is different. Then > I test the feel, standing over the bike, with the hoods 3/4 tightened, so I > can nudge them and fudge them into the right spot. > > Philip > www.biketinker.com > > > > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en-US. For more options, visit https://groups.google.com/groups/opt_out.
