All, After confirming I have a 110 BB I ordered the gaurd and the 74/ 32 ring that was missing from my QB's crank. I intend to run a 16t freewheel on one side and a 15t fixed cog on the other side of a fixed/ free flip flop hub. This should give me a nice cruising gear in fixed and the 16 Fw has just barely enough runout on the dropouts (track ends) to be able to change rings. It looks like the axle will be darn close to the very end of the slots when on the 32 ring (yes, no?). I have another fixed/ fixed wheel that I'll have a 16t, 15t. Maybe look into getting some dingle cogs for a wider fixed range. BTW, how does the inner 32 ring do riding fixed with the not perfect chain line? Also If I want the 8t range of the slot with the 15 tooth would I need to take a link of chain out and add back a 1/2 link? Simplicity can get confusing. Best, Clyde Canter
On Mon, Jan 14, 2013 at 2:29 PM, clyde canter <clyde.can...@gmail.com>wrote: > Many thanks all. > > > On Sun, Jan 13, 2013 at 5:55 PM, qwerty <mike.gilles...@gmail.com> wrote: > >> Hi Clyde, >> >> I can confirm that Jim's correct. My early version (green) Quickbeam >> came with a Sugino XD2R crank mounted on a Shimano BB-UN53 bottom >> bracket with a 110mm width. >> >> Mike G. >> >> On 1/13/13, Cyclofiend Jim <cyclofi...@earthlink.net> wrote: >> > Hey there Clyde - _Pretty_ sure it was a 110 Shimano. >> > >> > When Google Groups had the old format, I had aggregated a page with bb >> > lengths for various models, according to some of the group members. It >> was >> > >> > here - >> > http://groups.google.com/group/rbw-owners-bunch/web/bb-spindle-lengths- >> > but it seems to have evaporated. Internet Wayback Machine says that's a >> > non-crawlable page... ooh that wacky internet. I _may_ have archived >> that >> > info, but it will take a bit to track down. >> > >> > There have been a few threads in this (newer) group format, so you might >> > also just search topics here too. >> > >> > 110 - 115 is pretty much the going range for Sugino cranks. >> > >> > hope that helps! >> > >> > Jim >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups >> > "RBW Owners Bunch" group. >> > To view this discussion on the web visit >> > https://groups.google.com/d/msg/rbw-owners-bunch/-/N5HzKW-mYdQJ. >> > To post to this group, send email to rbw-owners-bunch@googlegroups.com >> . >> > To unsubscribe from this group, send email to >> > rbw-owners-bunch+unsubscr...@googlegroups.com. >> > For more options, visit this group at >> > http://groups.google.com/group/rbw-owners-bunch?hl=en. >> > >> > >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To post to this group, send email to rbw-owners-bunch@googlegroups.com. >> To unsubscribe from this group, send email to >> rbw-owners-bunch+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/rbw-owners-bunch?hl=en. >> >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
