IIRC, M bars use road brake levers whereas Bullmoose bars (regular + Bosco) require MTB brake levers due to their different diameter. Cables are also going to be different.
René On Tue, Jan 8, 2013 at 11:29 AM, William <tapebu...@gmail.com> wrote: > I run my 'mooses with really long taped grips. I don't remember the > dimensions, but I could measure when I'm at home. > > > On Tuesday, January 8, 2013 11:04:51 AM UTC-8, BSWP wrote: >> >> I'm going to try the Bullmoose bars on my QuickBeam, as a test change >> from the 'M bars. It's easy enough to remove the moustache bars, brake >> levers and stem as a clean cockpit, leaving my tape wrap in place, for a >> quick change back later on. But for Bullmoose bars, has anyone experimented >> with placing the brake levers well to the inside and just building up tape >> wrap for a wide hand placement area? I think I'll try that, it would put >> the brake levers similar to where I'm used to them, and leave lost of room >> for moving my hands around. >> >> And oh, are these Moosies wide! I'm not going to trim 'em narrower just >> yet, but slipping through traffic will be more interesting, that's for sure. >> >> - Andrew, Berkeley >> > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/rbw-owners-bunch/-/s2Uhdr8swsIJ. > > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
