Thanks for that, it's encouraging to hear it can be and has been done! - Andrew, Berkeley
On Sunday, September 30, 2012 9:57:09 AM UTC-7, tim becker wrote: > > I just did this a few weeks ago and I can confirm it works, at least on > my Atlantis. The Tektro hanger comes with two recessed allen nuts that > work with the Nitto. A Sheldon's fender nut works here too, but the rack > stud is too long to allow the second bolt that attaches the fender to > engage. The angle of the rack changes slightly due to the thickness of the > hanger, and the one or two thick toothy washers needed to clear the lower > headset cup - so attaching the lower struts to the braze-ons takes a little > more encouraging than usual. > hope that helps. > > -tim > > On Saturday, September 29, 2012 2:24:01 PM UTC-6, BSWP wrote: >> >> Is it possible to combine a lower brake hanger, like the Tektro item RBW >> sells, with a Nitto mini front rack? I would like to get better cable >> routing for my front brake, and the fork crown mounted hanger looks like a >> good item. But can the Nitto mini-rack bolt then pass through with enough >> threads to fasten it on the back side of the fork? Maybe someone has tried >> this... >> >> - Andrew, Berkeley >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/mB4M5fgZqQUJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
