I'd ride the setup you have now until the bearings failed or it took a lot 
of maintenance to true. But I'm notoriously cheap. 
Iro Cycles (down for maintenance right now) had super cheap track hubs, 
rims and spokes for a while. Formula/Velocity, I think. The rims build up 
easily, and have been solid for me. 
Someone on this list has a freewheel hub they can sell you for $5-$20. 
Fixie wheelsets are $100-$150 on eBay. You can (probably) just spin a 
freewheel on there. 

Philip
biketinker.com

On Monday, August 6, 2012 10:19:49 AM UTC-7, rex wrote:
>
> hi everyone
> im looking for a rear hub to be made into a wheel for my quickbeam. i am 
> currently running it as a 5sp freewheel with clamp on derailer via a cheap 
> 126mm wheel sourced from my lbs. we "respaced" it to about 122mm with 
> slimmer nuts and it works quite well. im convinced i want to keep it this 
> way. so now i want to have a nicer wheel built up to be permanent. the 
> trouble is the paul or phil hubs that fit my needs are about $190. i was 
> hoping to get the whole wheel for around that.
> any thoughts as to an alternative hub or do any of you out there have a 
> 120mm 5 speed freewheel hub youd sell? 
> i have seen a freewheel hub branded quando in 126mm. they have sealed 
> bearings and sell for around $30. the guy at the lbs said i could change 
> out the freewheel spacer to a 5sp one from a 6sp one and grind of 3mm on 
> each side of the axle and id be right there. it would work out ok too since 
> id have that done before the wheel was built to get the dish right easier. 
> a wheel with that hub and a sun cr18 rim @36 spokes works out to be about 
> $150. that dosent sound too bad to me for a hand built wheel. any thoughts 
> as to the positive/negative ramifications of doing this?  
> thanks for your time
> joe kelly
> columbus ohio 
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To view this discussion on the web visit 
https://groups.google.com/d/msg/rbw-owners-bunch/-/XAemRzWK-L4J.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to