I've got a set on a non-Riv bike and they work just fine. Since the bike they are on is my 26" wheeled constant evolution frame I'll probably put the CX70s on my Hunq when that arrives and swap the CR720 from the build kit to this "project bike." In any case I didn't even have any trouble with squealing somehow managing to get it right the first time (which doesn't often happen with me).
Do keep the various spaces and such though as I had to respace everything I went to a wider and stronger rim while building a new rear wheel. Good brakes though. Bob On Sun, Aug 5, 2012 at 2:30 PM, Doug Magney <yengamg...@gmail.com> wrote: > I have the CX70s on my Hunq with no issues. Pretty straightforward to > install if you read the directions, but not exactly intuitive. Had a few > problems with squeeling, but hard to say if they're particular to this > brake or attributable to cantis in general - not enough of an expert to say > for certain. Wheel removal is a breeze with these brakes. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/rbw-owners-bunch/-/8tWypaYxgw0J. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- Robert Harrison rfharri...@gmail.com statrix.com -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
