My bar-end shifters got moved to the DT on my 65 AHH. I don't have the part your'e looking for. I do have DT shifters on a big-ish frame. Yeah, they're a ways down there, especially since I switched to Alba bars, but I'm not a frequent shifter so it's fine. My other bike has a busy cockpit so the cleaner cockpit on the AHH that the DT shifters allow is pleasant. It also allows for easier bar changes... not that I'm swapping bars on a regular basis, but I like to have options.
--Andy On Sunday, July 1, 2012 9:24:40 PM UTC-7, Rob wrote: > > Anyone have an extra pair of downtube stops for Silver Shifters? These > would be the washers with a square hole that fit over the downtube bosses > and have a stop welded on--the extra bits that get shipped with the > shifters that you don't need if you're using them as bar-ends. > > A set of Silver bar-ends came with my bike, and after a couple years of > being very happy with the Campy brifters I installed when I first got the > bike I've got a hankering to try something different. Downtube shifters are > pretty far down there on a 62cm 650b Saluki, but the simplicity of it all > is appealing. > > Thanks. > > Rob in Seattle > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/PgnepB_tyX0J. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
