Thanks for pointing that out Steve. I re-computed my math and I get similar numbers too you. I was estimating the weight distribution different and rounding down my estimate in that space between 30 and 50 psi.
On Thu, Jun 7, 2012 at 4:18 PM, Steve Palincsar <palin...@his.com> wrote: > On Thu, 2012-06-07 at 16:09 -0700, JL wrote: > > Jan Heine's chart about 15% deformation and load distribution claims > > that at my weight (175lbs with the bike) I should ride pressures in > > the 30s for 32mm tires - that seems very low. > > > > I think you're reading that chart wrong. I'm guessing 60 rear, 50 front > would be about right, based on my reading of the chart. How'd you come > up with 30? That would be < 50 lb per wheel. > http://www.bikequarterly.com/images/TireDrop.pdf > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
