That would be the answer. Replacing a worn chain resulting in skipping should always make you think "worn cassette". If no amount of adjusting dials it in, it's time for a new cassette.
I didn't see the original thread here, but if you're using a master link, make sure it's installed properly. If it isn't seated properly, it may be shorter than it should be at that link. If you have a Wipperman link, there's an orientation that you need to worry about. Barring that, new cassette. Joe Joe Bartoe Synaptic Cycles Bicycle Rentals, Inc. email: j...@synapticcycles.com website: www.synapticcycles.com Twitter: @synapticcycles phone: 949-374-6079 > Date: Sun, 15 Apr 2012 19:12:06 -0700 > Subject: [RBW] Re: New chain skipping > From: tki...@comcast.net > To: rbw-owners-bunch@googlegroups.com > > I agree. Both of those answers are probably the two most likely > suspects. Your old chain and your cassette wore together, and when you > put the new chain on, it revealed the wear in the cassette that was > hidden before. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
