Ever since I installed the Nitto Mini Front Rack on my Atlantis, the mounting rod that mounts through the fork crown hole interferes with the link wire of my IRD cantis. You can see a picture of the IRD cantis and how low the link wire sits here:
http://www.interlocracing.com/brake_canti.html and Riv's picture showing all kinds of clearance with theirs here: http://www.rivbike.com/PhotoGallery.asp?ProductCode=r2 The link wire actually sits on the threaded rod when the brakes are open, enough so that when I put new brake pads on, I can't open them all the way. Is it possible to get a different link wire that sits higher up, and still gives the same amount of braking power, or do I just need new brakes, or a new rack? I don't really use the rack except to hold my front basket, btw. Cheers, Robert Opalko -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/Uxrjt0ObWygJ. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
