Thread taps will clean up the threads if they are deformed, but the shop would probably appreciate it if the abrasive grit was out of the threads first.
Bill On Nov 26, 6:28 am, James Valiensi <valie...@mac.com> wrote: > Hey, > I recommend you have the LBS run a set of BB taps thru your shell. That will > clean it up real nice. > James Valiensi, PE > Northridge, CA > H818.775.1847 M.818.585.1796 > > On Nov 26, 2011, at 2:40 AM, islaysteve wrote: > > > > > Thanks for the tips, guys. Paint thinner didn't seem to work too well, so > > I thought a stiffer brush might be needed. I can try WD40 and if that > > doesn't work, can get Naptha at the hardware store or HD without too much > > trouble. Steve > > > -- > > You received this message because you are subscribed to the Google Groups > > "RBW Owners Bunch" group. > > To view this discussion on the web > > visithttps://groups.google.com/d/msg/rbw-owners-bunch/-/QtPg8Ool-d0J. > > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > > To unsubscribe from this group, send email to > > rbw-owners-bunch+unsubscr...@googlegroups.com. > > For more options, visit this group > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
