Thanks for the tip. I just got two sets and this will surely avoid any installation hassles!
René Sent from my iPhone 4 On Oct 15, 2011, at 6:59 PM, EricP <ericpl...@aol.com> wrote: > Just finished installing a set of 26" Foss tubes on a bike. > Discovered something. My tendency has always been to slightly inflate > the tube just to go from flat to round. Makes it fit in the tire > casing easier. Well, not with the Foss. If you inflate at all, it > will be too small to fit around the rim(!) On the second tire, just > pulled it out of the box, took off the valve cap and installed. No > muss, no fuss. Took a few seconds to wrap my mind around it. But it > worked. > > BTW, on my tubes, the valves are not perfectly straight through the > holes. Not an issue to me, but might be to someone who wants the bike > just so. > > Eric Platt > St. Paul, MN > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
