On Mar 25, 3:29 pm, Rob <robha...@gmail.com> wrote: >Never overhauled a bottom bracket before.
and you won't need to with a sealed bearing bb - just pull it out (as you'll want to anyway when applying the framesaver), clean the bb shell and cups, regrease and install. good to go. >Not even quite sure how to get these TA Pro Vis cranks off! ahh, the hidden cost of the TA "cyclotouriste." you'll need a puller with 23mm threading. not the cheapest tool, so try to find a used one. or make pals with somebody who has one. or go to shop that works on older bikes. I recall a review in an issue of BQ where the electra "ticino" cranks were compared to the TA's on a cost basis - the cost of a new puller ($50 or so) for the TA's should have been included because most folks who have newly acquired the TA don't have this tool. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
