On a related topic, I just installed silver bar end shifters on my Blériot (pix to come). My installation kit came with four square hole washers: two with tabs and two without. The instructions only showed the tabbed washers and indicated that the tabs should point into the pods. However they do not reach into the pods unless the untabbed square washers are put onto the bosses first. If I were to do that, then the cable line would not be aligned with the cable hole in the pod. Since having a properly tensioned cable is most important, I simply left the tabbed square washers out. Everything seems fine and shifting is smooth. But I wonder what those tabbed square hole washers were for. Again, the untabbed washers were not in the instructions, while the square washers in the youtube installation video don't have tabs. Any thoughts? thanks, bdl
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
