Eric, I'm not sure if you're asking about the Nitto rack bolt, or a source for the bracket...? If you need the bracket, I ordered mine from Mike Kone at Rene Herse Bicycles: http://www.renehersestore.com/servlet/the-341/Light-Bracket-for-Edelux/Detail
They custom make this aluminum bracket to fit the Nitto M12 rack that they use on the Boulder Bicycle All Road and Randonneur bicycles. I had to do some judicious filing and Dremel tool work on the bracket to get it to fit a Busch & Muller Lumotec light, but it wasn't that difficult (the bracket is designed to fit the Edelux and Cyo headlamps). The bracket isn't cheap, but it definitely provides a very rigid mount for the light that won't jiggle even over a rough road surface. If you're mostly interested in the Nitto rack bolts, I had one available that I used. Rivendell obviously has them available (per the post from William). Jim Cloud On Jan 5, 11:03 am, "E.B." <ebko...@gmail.com> wrote: > Jim, > > Can you tell me about the mount for your Lumotec? I haven't ordered > my dynamo light yet, but I wish to decide on how to mount before doing > so. I'm leaning toward using a Nitto rack bolt to secure a bracket to > the rack strut as you have done. However, I don't know of a source > for such a bracket. Did you fabricate yours, or am I missing a > source? > > Also, your bar wrap looks fantastic. Thanks for sharing the photos. > > Eric -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
