Hi Cyclotourist,

My household has a Burley Nomad cargo trailer that my husband uses
each week to pick up our CSA share.  This spring, I converted our
Nomad from the old-style clamp-on hitch to the "standard forged"
hitch, so I could put a rear-mount kickstand on my husband's new bike
(a Surly Cross-Check).

We got the replacement hitch at www.biketrailershop.com.  If you order
one, you'll need to know whether your Burley has round or square
tubing in the tow arm.  You can get extra receivers if you use the
trailer with more than one bike.

The kickstand doesn't interfere with the trailer.  We did have to put
a slightly longer axle on his rear wheel to accommodate the trailer
hitch receiver.

Regards, Lisa

On Jul 24, 7:48 pm, cyclotourist <cyclotour...@gmail.com> wrote:
> I've looked at those, but my kid-trailer hauling duties preclude a rear
> stand.  The Burley trailer mounts right onto the tube junction where the
> stand attaches.
>
> But thanks for the suggestion!  :-)
>
>
>
>
>
> On Sat, Jul 24, 2010 at 4:41 PM, Angus <angusle...@sbcglobal.net> wrote:
> > David,
>
> > I was hoping my Atlantis would have a kickstand plate - but mine was
> > an older one (apparently 64s are the most popular size).
>
> > A recent thread seemed to indicate that the rear mounted stands were
> > the most stable especially for a loaded bike.
>
> > I think I'll try the rear mounted kickstand.
>
> > Angus
>
> > On Jul 24, 3:55 pm, cyclotourist <cyclotour...@gmail.com> wrote:
> > > I wish I had a plate on my AR.  Clamping it onto the chainstays isn't
> > such a
> > > good thing.
>
> > > On Sat, Jul 24, 2010 at 12:47 PM, Brad Gantt <brdg...@gmail.com> wrote:
> > > > Forgive me if this is a silly question. I am finally getting around to
> > > > mounting my Pletscher KS on my Riv custom which has a handy plate for
> > > > just this purpose. Since I will not be using the top mounting plate
> > > > that came with the 'stand, I am wondering if I need to use a nut,
> > > > washer, whatever to do the job right. Lastly, to those Bunchers who
> > > > have done this already, did you use the supplied bolt as-is, hacksaw
> > > > it down, buy a shorter one? There will be a lot of unused bolt hanging
> > > > below the plate. Not sure it will make any difference. Just curious
> > > > what other folks have done. Thanks!
>
> > > > --
> > > > You received this message because you are subscribed to the Google
> > Groups
> > > > "RBW Owners Bunch" group.
> > > > To post to this group, send email to rbw-owners-bunch@googlegroups.com
> > .
> > > > To unsubscribe from this group, send email to
> > > > rbw-owners-bunch+unsubscr...@googlegroups.com<rbw-owners-bunch%2Bunsubscrib
> > > >  e...@googlegroups.com>
> > <rbw-owners-bunch%2bunsubscr...@googlegroups.com<rbw-owners-bunch%252Bunsub 
> > scr...@googlegroups.com>
>
> > > > .
> > > > For more options, visit this group at
> > > >http://groups.google.com/group/rbw-owners-bunch?hl=en.
>
> > > --
> > > Cheers,
> > > David
> > > Redlands, CA
>
> > > "Bicycling is a big part of the future. It has to be. There is something
> > > wrong with a society that drives a car to workout in a gym."  ~Bill Nye,
> > > scientist guy
>
> > --
> > You received this message because you are subscribed to the Google Groups
> > "RBW Owners Bunch" group.
> > To post to this group, send email to rbw-owners-bu...@googlegroups.com.
> > To unsubscribe from this group, send email to
> > rbw-owners-bunch+unsubscr...@googlegroups.com<rbw-owners-bunch%2Bunsubscrib 
> > e...@googlegroups.com>
> > .
> > For more options, visit this group at
> >http://groups.google.com/group/rbw-owners-bunch?hl=en.
>
> --
> Cheers,
> David
> Redlands, CA
>
> "Bicycling is a big part of the future. It has to be. There is something
> wrong with a society that drives a car to workout in a gym."  ~Bill Nye,
> scientist guy

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to