I shortened her stem and its better but I'm gonna keep an eye out for some RBW Billie bars.
I think everyone has steered me away from the bosco which was helpful. On Tuesday, April 28, 2026 at 11:52:57 AM UTC-7 Steffen wrote: > Great looking touring setup Alex! > > @cwspringer > Did you decide on a bar yet? I would love to see the final result. > [email protected] schrieb am Samstag, 18. April 2026 um 23:51:05 UTC+2: > >> At last! Another Albacore on a Gus! It’s really so good, right? >> Sent from my iPhone >> >> On Apr 17, 2026, at 8:26 PM, Alex Friend <[email protected]> wrote: >> >> >> >> Hey there! >> >> I have tried a variety of bars on my 56cm Susie and found the most >> comfortable setup for me to be a bar around 50 degrees of back sweep. I >> have on it currently the Lekers Leks Albacore bars - 765mm wide - 25mm rise >> - 51 degree sweep - 22.2mm clamp. They are so comfy wide and you can grab >> anywhere. I felt going more backswept took away from the handling. I >> attached a photo with the bars. I have had doom legal drinkers (21 degree >> sweep) which felt good and Choco moose bars (80 degrees sweep) which really >> felt like that took away from the handling. >> >> Cheers and I hope you find something that works for you! >> Alex >> >> [image: image0.jpeg] >> >> On Apr 15, 2026, at 3:54 PM, derek zeitel <[email protected]> wrote: >> >> Steffen, >> Your Susie looks quite close to what I'm putting together. What are your >> thoughts on the Saber Pros? I'm guessing that is the 2.6 width? >> I tried the 29x2.6 Saber Pros about 5 years ago and my pair were woefully >> undersized on i30 rims - they were closer to 2.3. That said, they were VERY >> light and supple. >> Would love to see a pic with the Mothbars if you have one available. >> Lovely bike, take care, >> Derek Z >> >> On Wednesday, April 15, 2026 at 6:44:28 PM UTC-4 Steffen wrote: >> >>> The picture shows the Tosco bars on a 100mm stem btw. >>> >>> Steffen schrieb am Donnerstag, 16. April 2026 um 00:40:06 UTC+2: >>> >>>> I rode Tosco bars with a 100mm stem on my 56cm Susie for a while. 185cm >>>> and 87 PBH. >>>> I never had the chance to try either Losco or Bosco bars. I’d assume I >>>> would prefer the Loscos for the way they ride, but I would probably still >>>> choose the Toscos for their looks. >>>> Trying different stem lengths is definitely the best way to find what >>>> works for you. It’s inexpensive or even free if you already have a few >>>> stems in your parts bin. Maybe your local bike shop is willing to lend you >>>> some for a small tip. >>>> >>>> After a while I wanted to lower my bars and went with Mothbars and a >>>> 60mm stem. I’m really happy with the setup now. >>>> [image: asdf.png] >>>> >>>> [email protected] schrieb am Mittwoch, 15. April 2026 um 22:26:09 UTC+2: >>>> >>>>> Michael, thanks for the heads up. This seems like a good opportunity >>>>> to add that I've had success filing down the metal expansion plug on bar >>>>> end shifters to fit bars with a smaller than agreeable ID. No issues >>>>> after >>>>> years of use in more than one application. >>>>> >>>>> On Wednesday, April 15, 2026 at 4:06:57 PM UTC-4 Michael Connors wrote: >>>>> >>>>>> Before you cut, check the inside diameter. The Blue Lug description >>>>>> says the bars are made thinner at the ends for bar end shifters. >>>>>> >>>>>> On Wednesday, April 15, 2026 at 2:31:01 PM UTC-5 [email protected] >>>>>> wrote: >>>>>> >>>>>>> I'm in the process of building up a new to me 59cm Susie and I'll be >>>>>>> using 610mm wide Loscos with a 90mm Nitto Pearl stem. I'm planning on >>>>>>> cutting a bit of length of the Losco, looks like 4cm or so. I'd prefer >>>>>>> a >>>>>>> bar with a bit less sweep than the Losco but nothing else ticked the >>>>>>> boxes >>>>>>> - I want to use bar end shifters, 25.4 bars so I so do not have to >>>>>>> replace >>>>>>> the stem, low to no rise and wide. 75 degree sweep would have been >>>>>>> ideal >>>>>>> (the Losco is 84 degree sweep). >>>>>>> The "upcoming" wider version of the Choco bar was looking like a >>>>>>> winner for me but Riv confirmed that project was abandoned in favor of >>>>>>> the >>>>>>> Bar 68. >>>>>>> >>>>>>> Derek Z >>>>>>> Buchanan, NY >>>>>>> >>>>>>> On Wednesday, April 15, 2026 at 2:43:22 PM UTC-4 Drew Fitchette >>>>>>> wrote: >>>>>>> >>>>>>>> I'd try to run a shorter stem first too, but I really love the >>>>>>>> Toscos and Albatross/Billie Bars if you want something to come back a >>>>>>>> little more. >>>>>>>> >>>>>>>> I've got Bar68's on my Susie, but I'm running an 85mm Stem on a >>>>>>>> 56cm frame. >>>>>>>> >>>>>>>> On Wednesday, April 15, 2026 at 2:22:28 PM UTC-4 [email protected] >>>>>>>> wrote: >>>>>>>> >>>>>>>>> The Granola bars “only” have 15cm of depth. The Riv bars are >>>>>>>>> Generally 20-25cm of depth, so you’ll significantly reduce your reach >>>>>>>>> with >>>>>>>>> something like a Tosco which is c. 23.5cm of depth. (The distance >>>>>>>>> between >>>>>>>>> the middle of the stem clamp and the axis of the two handlebar ends). >>>>>>>>> The >>>>>>>>> best way to do this is to find out where she’d like her hands to be >>>>>>>>> and go >>>>>>>>> from there with either new bars or shorter stem or both. Your wife >>>>>>>>> is >>>>>>>>> tall, but I’m directionally similar with a 86pbh. I’m 5’11” and am >>>>>>>>> assuming >>>>>>>>> that your wife’s legs are somewhat longer than mine, relatively >>>>>>>>> speaking. >>>>>>>>> If so, she could probably do with a pretty considerable reduction in >>>>>>>>> reach. I’m on a 57cm Gus with a 50mm BMX stem and a custom swept bar >>>>>>>>> with >>>>>>>>> a depth of 24cm. I’ve run a Crust Ortho Bar with a 70mm stem and it >>>>>>>>> worked >>>>>>>>> really well. I can confirm that handling is just fine with the >>>>>>>>> shorter >>>>>>>>> stems. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Wed, Apr 15, 2026 at 1:59 PM CW Springer <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> I'm fitting up a Susie for my wife and the current VO bars are a >>>>>>>>>> bit of a reach with a long stem as well. >>>>>>>>>> >>>>>>>>>> Going to try a shorter stem but do folks prefer the Bosco, Losco, >>>>>>>>>> or Tosco on their Susies? She's on an XL with a 90ish pbh. >>>>>>>>>> >>>>>>>>>> -CW >>>>>>>>>> >>>>>>>>>> [image: 00A0A_a8RSYSC6GD8_0t20CI_1200x900.jpg] >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "RBW Owners Bunch" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To view this discussion visit >>>>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/32208059-23fe-423e-ac30-c896f230d805n%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/32208059-23fe-423e-ac30-c896f230d805n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/3c511389-071c-4c70-90de-ff5daacddd37n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/3c511389-071c-4c70-90de-ff5daacddd37n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/317951D6-8349-4746-95EF-F57B3C3DA03C%40gmail.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/317951D6-8349-4746-95EF-F57B3C3DA03C%40gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/fc4c647e-3c1e-4665-a7e3-7979acf03198n%40googlegroups.com.
