Recurring (twice) problem, But first a little background. I have had my Clem for close to four years. Deore rear der. and Silver shifters. They are mounted inside of the brake lever in "Riv style". I am on pace to have 10,000 miles on this bike and zero cable / shifter problems. About two years ago I built up my Gus from a frame. I installed the very same Deore rear der. but used the Silver shifters from Blue Lug instead of from Riv. I did so to get the barrel adjusters that come from Blue Lug vs. the adjustable cable exit angle you get with the Riv units. I did so because I was looking at older Rapid Rise units that do not come with barrel adjusters, which I presumed I needed. As a novice bike mechanic I did not comprehend that a full friction setup does not really need barrel adjusters. Anyway my rear shifter cable began to fray & eventually break where it exits the shifter & enters the barrel adjuster. I installed a new cable along with the Rapid Rise Nexave rear der. Now that cable has also frayed to the point of likely breaking on my next ride. The Gus has only two thousand miles on it. I wrote here about the first one breaking and was informed (I think) that others had reported similar issues with early Silver shifters. Can anyone confirm that? Is my shifter unit the likely culprit or is it the fact that I do not have the Riv supplied adjustable cable angle fitting? I will send pics in a comment. Any help very much appreciated.
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/2bc7ff59-8afb-46a5-b66d-ea55fa95f415n%40googlegroups.com.
