The WonderLight! We thought that was light!? Hehe. Better than nothing I suppose. :)
On Monday, August 4, 2025 at 4:53:27 AM UTC-7 [email protected] wrote: > Do yourself a favor and try a fork crown mount. Compare how the beam on > the road surface compares between the two mounting locations. > > Remember all of those groovy old French bikes with the flashlights > attached to the left side of a front rack? The reason that worked is that > the optics of the flashlight concentrated the meager light output of the > bulb into a small patch so that you could at least see something on the > road surface. With a modern LED headlight such as the Edelux II, you not > only have a headlight that produces a much brighter beam, but that beam can > be many times as wide and tall as those old incandescent bulbs in the cute > old French flashlights. > > On Sun, Aug 3, 2025 at 5:11 PM J-D Bamford <[email protected]> wrote: > >> [image: IMG_1524.jpeg]Since i had a spare light bracket set aside for a >> future project, i doubled up and now the setup has good lateral strength. >> Regarding other comments… putting a bracket directly on the hourglass boss >> would risk cracking the paint (assuming the light is bolted tight enough, >> with star washer, to eliminate rotational slip). At least that’s how it >> seems. >> As for the shadow cast… we’ll see how it looks IRL. My daughter and i >> totally messed up a SON coaxial adapter (soldering) today, so for now no >> actual in use report (and no ability to lengthen the run and relo to left >> fork blade). Might end up resorting to the plain spade connectors, which >> really aren’t so bad. >> >> On Sunday, August 3, 2025 at 2:55:00 PM UTC-6 Patrick Moore wrote: >> >>> Elegant! I suppose that the wheel does not throw enough of a shadow to >>> be annoying? >>> >>> I might do something like this for the IQ XL in just installed on my >>> Matthews dirt road road bike, since various constraints mean that my other >>> headlamp mounting options are just below the bar as presently with >>> bar-clamp mount (but lamp would be covered by rain cape in the event) or on >>> the fender (would prefer to mount where removal of fender does not affect >>> position), or on one of the fork legs. >>> >>> My fork crown is not drilled, and I can’t drill it because I spec’d a >>> very deep threaded fender boss inside the crown. >>> >>> On Sat, Aug 2, 2025 at 4:20 PM J-D Bamford <[email protected]> wrote: >>> >>>> [image: IMG_1518.jpeg] >>>> When I migrated from a randonneur frame to the Roadini, I decided to >>>> forgo a front (rando-style) rack and bag. This is what I came up with. >>>> >>>> When I migrated from a randonneur frame to the Roadini, I decided to >>>> forgo a front (rando-style) rack and bag. I flirted with different light >>>> mounts on the market, but was underwhelmed. I had good experience >>>> previously with the Velo-Orange light bracket, but wasn’t sure if one >>>> would >>>> hold its position well on the Roadini’s hourglass fork bosses (and I >>>> didn’t >>>> want to crank too tightly on any bolts or star washers which might crack >>>> this pretty bike’s paint). >>>> >>>> I found inspiration when I spotted thinwall aluminum tubes at the >>>> hardware store. This one was 12” long and cost $2.49. I cut it to length, >>>> flattened the ends, eyeballed thru holes, and mounted it using flat >>>> washers >>>> to keep the thin aluminum from being sheared by a torqued bolt or nut. >>>> Really pleased with its simplicity… and the tube hardly weighs a thing. >>>> >>>> Importantly, this setup doesn’t have much lateral strength. It’ll be >>>> fine for regular riding. But if you were to drop the bike or lean it up >>>> against something the wrong way, the whole bracket assembly could be >>>> pushed/bent towards the spokes. If this aluminum tubing doesn’t last, I’ll >>>> re-do this with stronger stainless tubing which will be at least somewhat >>>> more laterally stiff. >>>> >>>> And yeah… I haven’t landed the coaxial cable yet. I’m expecting a SON >>>> coaxial hub adapter to deliver soon, and will be using SON’s coaxial plugs >>>> to quick release. I might extend the coax long enough to have a left-side >>>> light mount, but for now it’s too short so will try it right-side and see >>>> how the light pattern (and cast shadow) play out. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "RBW Owners Bunch" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion visit >>>> https://groups.google.com/d/msgid/rbw-owners-bunch/dd4663ec-428a-40d9-be71-41923b0053a3n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/dd4663ec-428a-40d9-be71-41923b0053a3n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> >>> >>> -- >>> >>> Patrick Moore >>> Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum >>> >>> ------------------------------------------------------------------------------------------------------- >>> >>> Executive resumes, LinkedIn profiles, bios, letters, and other writing >>> services >>> >>> >>> ------------------------------------------------------------------------------------------------------- >>> >>> *When thou didst not, savage, k**now thine own meaning,* >>> >>> *But wouldst gabble like a** thing most brutish,* >>> >>> *I endowed thy purposes w**ith words that made them known.* >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/5a19e1f6-2021-4bf9-99ea-39a729ae8005n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/5a19e1f6-2021-4bf9-99ea-39a729ae8005n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > > > -- > Peter White > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/0000d52e-c061-416e-88a0-a356d1aac16fn%40googlegroups.com.
