The black pair got oak, cut from a local tree. The silver was whichever Riv sold, maybe walnut.
On Sunday, April 6, 2025 at 12:50:59 PM UTC-7 [email protected] wrote: > @J > > Thank you for sharing your pictures of your modified pedals. > > What wood did you use? > > Thanks for the heads up for pedal strikes. I will keep that in mind. I > have a SILVER 173mm CRANKSET with a 27.5 wheelset. > > Kim Hetzel. > > On Sun, Apr 6, 2025, 12:37 PM J Imler <[email protected]> wrote: > >> I've been riding these modified pedals since Riv sold the extension kits. >> *Beware >> of pedal strike.* I went to 170mm cranks from 175 on the Cheviot and >> it's been good to go. The Clem got the rustic black set and at 178mm no >> issue but not tons of miles. >> >> [image: IMG_0674.jpg] >> >> [image: IMG_3614.jpg] >> >> >> >> On Sunday, April 6, 2025 at 8:50:52 AM UTC-7 [email protected] wrote: >> >>> @Garth, >>> >>> You are more than welcome. I am very happy you enjoyed my hand drawing >>> of the pedal. It was fun. >>> >>> Is there a need at this time to take pictures? >>> >>> Kim Hetzel who has yet to do a road test of these pedals. >>> >>> >>> >>> >>> On Sun, Apr 6, 2025, 2:02 AM Garth <[email protected]> wrote: >>> >>>> >>>> That's awesome Kim :-) I love the hand drawing, Thank you ! >>>> On Saturday, April 5, 2025 at 10:49:58 PM UTC-4 [email protected] >>>> wrote: >>>> >>>>> @Dan and Garth >>>>> >>>>> Here for now is a drawing with measurements, and a material list. >>>>> >>>>> *The drill sites are 2.13" c to c >>>>> *The drill sites from end to center is .037". >>>>> *I used a drill press >>>>> >>>>> I will take some pictures at a later time. >>>>> >>>>> Kim Hetzel applying my artistic skills. >>>>> >>>>> >>>>> On Sat, Apr 5, 2025, 10:09 AM Garth <[email protected]> wrote: >>>>> >>>>>> I'd like the measurements also ! Specifically, maybe a photo would do >>>>>> well with a tape measure of the front to back total length, and the >>>>>> total >>>>>> width, with the tape masure up against the arms t >>>>>> >>>>>> On Saturday, April 5, 2025 at 12:46:08 PM UTC-4 Nick Dabagia wrote: >>>>>> >>>>>>> Kim, >>>>>>> The measurements and bolts would be super useful. >>>>>>> >>>>>>> I have the same setup, down to the color. >>>>>>> >>>>>>> Much obliged to you! >>>>>>> Nick >>>>>>> >>>>>>> >>>>>>> On Sat, Apr 5, 2025 at 11:19 Kim H. <[email protected]> wrote: >>>>>>> >>>>>>>> @Nick, >>>>>>>> >>>>>>>> You are more than welcome. >>>>>>>> If and when you decide to get around to it let me know. I would be >>>>>>>> more than happy to provide you with the measurements and the specific >>>>>>>> size >>>>>>>> screws you need. >>>>>>>> >>>>>>>> Kim Hetzel. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Sat, Apr 5, 2025, 7:58 AM Nick Dabagia <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Wow Kim! >>>>>>>>> >>>>>>>>> Great initiative and thanks for the inspiration to do the same. >>>>>>>>> Will post if I ever get around to it. >>>>>>>>> >>>>>>>>> Nick >>>>>>>>> The Triangle, NC >>>>>>>>> >>>>>>>>> On Friday, April 4, 2025 at 10:50:16 PM UTC-4 [email protected] >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Recently, I needed a bicycle project to do, since I am finished >>>>>>>>>> tinkering with my Clem. My inspiration came from a short video on >>>>>>>>>> Vimeo >>>>>>>>>> under Rivendell Bicycle Works called "Pedal extenders" from two >>>>>>>>>> years ago. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> https://vimeo.com/709656292?autoplay=1&muted=1&stream_id=Y2xpcHN8MjkwOTI1MnxpZDpkZXNjfFtd >>>>>>>>>> >>>>>>>>>> I noticed in the video that there was small blocks of wood, one >>>>>>>>>> light, maple ? and the other dark, walnut ? I do not know for >>>>>>>>>> certain. I >>>>>>>>>> thought since I live the PNW I will try aluminum. >>>>>>>>>> >>>>>>>>>> I purchased the correct length and amount of screws (8) and an >>>>>>>>>> solid square aluminum bar. I did my measuring with a pair of >>>>>>>>>> calipers, >>>>>>>>>> marked my holes to be drilled and the cut-off points. >>>>>>>>>> >>>>>>>>>> Afterwards, upon assembly, I encountered two of the metal bars >>>>>>>>>> with holes aligned well, while the others did not. Therefore, they >>>>>>>>>> needed >>>>>>>>>> to be drilled out more. >>>>>>>>>> >>>>>>>>>> All in time, I managed to get them all assembled and back >>>>>>>>>> together. I am happy with outcome. I just have to do a road test. >>>>>>>>>> >>>>>>>>>> I forgot to mention that I cleaned out and re-greased the ball >>>>>>>>>> barrings in both pedals before I started my project. >>>>>>>>>> >>>>>>>>>> Kim Hetzel. >>>>>>>>>> >>>>>>>>>> [image: 20250404_164054.jpg] >>>>>>>>>> [image: 20250404_172731.jpg] >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>>> the Google Groups "RBW Owners Bunch" group. >>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/rbw-owners-bunch/XHBh6AhMtDY/unsubscribe >>>>>>>>> . >>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>> to [email protected]. >>>>>>>>> To view this discussion visit >>>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/a4bca97d-b095-4f10-a655-f502f21cf1b5n%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/a4bca97d-b095-4f10-a655-f502f21cf1b5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>> the Google Groups "RBW Owners Bunch" group. >>>>>>>> To unsubscribe from this topic, visit >>>>>>>> https://groups.google.com/d/topic/rbw-owners-bunch/XHBh6AhMtDY/unsubscribe >>>>>>>> . >>>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>>> [email protected]. >>>>>>>> >>>>>>> To view this discussion visit >>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/CANRt_xn%2BtpRy4jqwPUKMhA-hYnc1w4fPvykfMGQv9OS7_8fOBw%40mail.gmail.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/CANRt_xn%2BtpRy4jqwPUKMhA-hYnc1w4fPvykfMGQv9OS7_8fOBw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "RBW Owners Bunch" group. >>>>>> To unsubscribe from this topic, visit >>>>>> https://groups.google.com/d/topic/rbw-owners-bunch/XHBh6AhMtDY/unsubscribe >>>>>> . >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> >>>>> To view this discussion visit >>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/7f3c9d06-30e8-46b5-a2de-30da86bb04f1n%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/7f3c9d06-30e8-46b5-a2de-30da86bb04f1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "RBW Owners Bunch" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/rbw-owners-bunch/XHBh6AhMtDY/unsubscribe >>>> . >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> >>> To view this discussion visit >>>> https://groups.google.com/d/msgid/rbw-owners-bunch/7b155823-757f-4592-b488-1f4f2f076a38n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/7b155823-757f-4592-b488-1f4f2f076a38n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "RBW Owners Bunch" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/rbw-owners-bunch/XHBh6AhMtDY/unsubscribe >> . >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> > To view this discussion visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/a8bea0dc-179c-464c-94ca-c3133729f07an%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/a8bea0dc-179c-464c-94ca-c3133729f07an%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/0613c658-693e-4cce-aa18-c3e3b0f8881cn%40googlegroups.com.
