Seeing that the rear spacing is a road-spec 130mm it's most likely a 110 BB.(A 107 is doubful as it doesn't offer any less driveside distance for a lesser chainline, and Riv recommends a 110 for their Silver crank). Do measure it though. Easy with even just a metric enabled ruler. On Friday, November 29, 2024 at 12:25:43 AM UTC-5 Bill Lindsay wrote:
> What's in there is most likely a 110mm, but I guess it could possibly be a > 113 or maybe even a 107. The length should be stamped in the spindle, so > have a look. Also you could just measure the length. It's going to be one > of those three sizes. > > Bill Lindsay > El Cerrito, CA > > On Thursday, November 28, 2024 at 5:29:20 PM UTC-8 Jim S. wrote: > >> I'm the proud owner of a Charlie Gallop frame. It comes with a >> pre-installed bottom bracket. But I can't figure out what size it is. I was >> hoping somebody knew. I don't really want to remove it if it's the size I >> need. Thanks in advance for any info. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/448c0816-a086-46e1-9377-01a81a814453n%40googlegroups.com.
