Hey Tristen - I'm almost 6'2" (almost) with a PBH of 91 cm and I have a 59cm Clem. I got it based on Rivendell's size recomendation and it happened to be in stock at my LBS last March. I initially built it up with a Nitto Tallux (?) stem with the 225 mm stem length and the 70 degee bend (quill parallel to the ground) and was initially disapointed that I couldn't get the bars as high as I wanted. At most they were just high enough. But this was with albatross bars and not some higher rise bars. I got some higher rise bars and that helped but what really did the trick was switching to the Nitto Faceplate stem with the 90 degree bend, with the same 225 stem length and a 110 mm extension. This gave me another couple inches of height which when combined with some higher rise bars is more than enough to get the bars to a comfortable height. There's still alot of stem showing but this has been handy since I mounted the shifters there. Another thing I like about the 59 is it has sufficient seat tube showing to attach seat bags to, etc. Not that you couldn't with a 64 cm though.
So, in sum, you'll be fine with the 59. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/e168456c-0c70-41c7-8e20-c489a66678bbn%40googlegroups.com.
