I have found https://whatbars.com/ to be very helpful. I replaced my last bullmoose with Ritchey Kyote bars, and I've also used Surly Open bars but if that Bull bar had been available, I would have tried it.
jim m walnut creek On Monday, August 26, 2024 at 11:49:35 AM UTC-7 maxcr wrote: > Have you seen the bullbar? I have it on my Atlantis and really like it > > > https://www.rivbike.com/products/handlebar-nitto-b901raa?srsltid=AfmBOoo21TuxDTc8_5dZM40Q4_DdekPaU69INyKw7NqX6RjQ_0rQZWdr > > Max > > On Monday, August 26, 2024 at 2:46:49 PM UTC-4 Ginz wrote: > >> I should have said.... similar sweep angle and overall extension, which >> is roughly negative by a few centimeters! >> >> On Monday, August 26, 2024 at 2:41:39 PM UTC-4 Ginz wrote: >> >>> Hello Everyone, >>> >>> I know that Bullmoose has be discussed quite a bit around here. >>> >>> I have the 150mm extension bullmoose from Rivendell. The rise, >>> especially on my Hunqapiller with the stem slammed, is a bit too much. >>> >>> Has anyone come up with a stem/bar combination that is both similar to >>> the sweep of the Bullmoose as well as off road appropariate, but with much >>> less overall rise? >>> >>> Thanks for any suggestions. >>> >>> Eric >>> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/80ebfa3a-d967-4e84-81ec-2c6210ca3b0fn%40googlegroups.com.
