There is a budget option from the UK - https://www.sjscycles.co.uk/gear-spares/jtek-special-thumb-shifter-brackets-for-222-mm-bars-black/?geoc=IN
You will need barrel adjusters - not too hard to find. There is a shipping cost but SJS has a lot of good stuff you can add to your order from the money you'll save :) plus the VAT is deducted for products shipped out of the country so it may work out well. On Wednesday, July 3, 2024 at 10:11:19 PM UTC+5:30 JAS wrote: > Roberta, > I have Microshift units on my Clem and Rivendell Silver shifters/levers on > the Platypus. I like them both, but Microshift shifts better. Good luck > with your decision! There's lots of good advice in this thread. > > RivSisters, > Joyce > > On Wednesday, July 3, 2024 at 7:07:35 AM UTC-7 Ted Durant wrote: > >> On Tuesday, July 2, 2024 at 6:04:46 PM UTC-5 Roberta wrote: >> >> I have Shimano bar end shifters (friction) on my A Homer Hilsen that work >> fantastically, but I've never liked placement as bar ends, because of me >> knocking them out of gear with my knee, hand, ooops bike just leaned on a >> wall . >> >> >> If your bike has downtube shifter mounts you can mount them there. >> >> Ted Durant >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/dd55ad87-0dba-4552-b13e-05398ca847cdn%40googlegroups.com.
