Doh! Just noticed that yours is a slotted screw in the photo, which reminded me that I swapped out the original screw on mine to one with a 3mm socket head. I don't remember if I had to replace the nut at the same time, so probably best to disregard my previous post and just bring the whole thing to the hardware store. On Wednesday, December 13, 2023 at 2:03:53 PM UTC-6 Danny wrote:
> Hi Roberta, > > That screw should be an M4 x 0.7 mm pitch thread. I think ~16mm in length > should be adequate. Is the nut on the other side still in place? > > Danny > Madison, WI > > On Wed, Dec 13, 2023 at 10:38 AM RichS <rshann...@gmail.com> wrote: > >> Roberta, if you have a nearby hardware store, Ace or similar in scale, >> not the big box HD variety, they should have the same screw or a capable >> substitute. >> >> Best, >> Rich in ATL >> >> On Monday, December 11, 2023 at 8:05:52 PM UTC-5 Roberta wrote: >> >>> Over the years, these dull. I always thought they pitted and the lack >>> of clarity was too much for me. I'd toss them and buy more. At $30 a pop, >>> it was a bit much, but I like the low profile of the mirror. >>> >>> I went to Riv's web site to get another, saw this, tried the baking soda >>> with water suggestion and now the mirror reflects as good as new! >>> >>> From Riv's site: " After a couple years the mirror might dull a bit, >>> but can be brought back to life by scrubbing it with baking soda and water, >>> or toothpaste." >>> >>> Roberta >>> >>> PS If anyone knows the size of this housing screw or has an extra one, >>> I'd like to know the size or buy the screw. >>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/fa5aba82-8838-4c64-bce3-2159973d7b9cn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/fa5aba82-8838-4c64-bce3-2159973d7b9cn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/be54afb3-58ce-40f9-9a84-5d3aaa2f3158n%40googlegroups.com.
