What are the two derailleurs on the bikes? The strength of the derailleur spring also plays a part in how much force is needed to move the shift lever. Same would go for the condition of the derailleur's pivots.
Brian On Wednesday, June 14, 2023 at 12:40:55 PM UTC-5 lconley wrote: > I have had multiple sets of Silver1 and Silver2 shifters. There can be a > lot of difference between "identical" shifters. > > You can try swapping shifters between bicycles and see if the feel follows > the shifter or stays with the bike. > > Laing > > On Wednesday, June 14, 2023 at 12:29:55 PM UTC-4 John Rinker wrote: > >> Thank you Piaw. This sounds like a fine option for the future when cables >> need replacing. Right now everything is pretty new and in great shape. >> >> I guess my question in this regard is more about why the shifting would >> be different given that all the variables appear to be identical. I'd love >> to replicate the way my Hunq shifts in my Atlantis, and so am curious as to >> which variables I might be overlooking. >> >> Cheers, John >> >> On Wednesday, June 14, 2023 at 8:16:05 AM UTC-7 [email protected] wrote: >> >>> Consider the Shimano OT-SP41 coated shift cables: >>> https://amzn.to/463eUM8 >>> >>> I haven't needed them yet, but I did try the brake cable version and >>> it's very impressive. >>> >>> On Tuesday, June 13, 2023 at 6:28:07 PM UTC-7 John Rinker wrote: >>> >>>> Thanks, Eliot. Yes, cable housings are filed and run in very smooth >>>> curves with no bends. I'll try easing off on the binding. >>>> >>>> Cheers, >>>> John >>>> >>>> On Tuesday, June 13, 2023 at 5:35:58 PM UTC-7 [email protected] wrote: >>>> >>>>> Also, did you file your cut housing ends? >>>>> >>>>> On Tue, Jun 13, 2023 at 5:34 PM Eliot Balogh <[email protected]> >>>>> wrote: >>>>> >>>>>> Hey John, >>>>>> >>>>>> It’s a little hard to tell over the internet but based on your >>>>>> description, a few thoughts come to mind. Are your cable runs clean with >>>>>> easy bends ? Is your housing contaminated ? Can you ease off the binding >>>>>> bolt on your shifter ? >>>>>> >>>>>> I have always avoided lubing my cables out of fear of attracting >>>>>> dirt. >>>>>> >>>>>> Eliot >>>>>> >>>>>> On Tue, Jun 13, 2023 at 3:15 PM John Rinker <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Both my Hunqapillar and Atlantis shift cleanly and, given the state >>>>>>> of the rider on a given day, precisely. The Hunq has buttery shifting >>>>>>> all >>>>>>> across the rear cogs- easy, smooth, and...buttery! The Atlantis, >>>>>>> however, >>>>>>> is smooth but a little more resistant to change, and requires a little >>>>>>> more >>>>>>> force. >>>>>>> >>>>>>> Both bikes have the same lengths of cable housing lined with a >>>>>>> silicon spray and the cables are greased with Slick Honey. The Hunq >>>>>>> sports >>>>>>> Silver Shifters 1.0 and the Atlantis, Gran Compe. Both as bar ends. >>>>>>> Aren't >>>>>>> these were basically the same shifters? >>>>>>> >>>>>>> So, what gives? >>>>>>> >>>>>>> Cheers, John >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "RBW Owners Bunch" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/97a124fa-704b-44d6-b92b-463031aa7582n%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/97a124fa-704b-44d6-b92b-463031aa7582n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/3b19105d-3ede-4121-a356-45796a380212n%40googlegroups.com.
